氢氧化钾进行加工的时候使用不同的方法来进行制作的，在众多的方法当中使用间歇处理法加工出来的产品纯度是比较高的，那么氢氧化钾进行加工时使用间歇处理法如何？
　　Potassium hydroxide processing when using different methods to make, in many methods using intermittent processing method out of the product purity is relatively high, then potassium hydroxide processing using intermittent processing method?
　　一般再进行加工的时候是需要使用间歇法锅式蒸煮的工艺来生产出来呈现熔融状态的碱性物质。之后再将生产出来的熔融状态的碱输送到高位槽当中，可以在高位槽底部的位置使用一些烧煤等燃烧起来进行保温工作，至于高位槽当中输送氢氧化钾的数量需要使用溢流装置等进行控制。
　　The general process of reprocessing is the use of intermittent pot cooking process to produce a molten alkaline material. After the production of molten state of alkali transport to the high tank, you can use some coal burning at the bottom of the high tank to burn up the heat preservation work, as for the high tank in the delivery of potassium hydroxide number need to use overflow device control.

　　之后再将碱液从高位槽当中输送到弧形碱槽，在输送的过程当中需要控制好输送的流量。对碱液进行蒸发处理之后的熔融碱在经过成品分离器之后进入到弧形槽。之后在进入到制冷滚筒表面当中的燕尾槽，一般滚筒的下面需要浸泡到弧形碱槽当中的深度要注意。
　　Then the lye is transported from the high tank to the arc alkaline tank, and the flow rate of conveying needs to be controlled in the process of conveying. The molten alkali after evaporation treatment enters the arc tank after passing through the finished product separator. After entering into the dovetail trough in the surface of the refrigeration drum, the depth of the general drum needs to be soaked into the arc alkali trough.
　　然后滚筒在以一个比较缓慢的速度进行转动，制冷水就会从轴承的一边慢慢的进入到轴承的中间，然后喷淋到滚筒的内表面对其进行冷却处理，这样就可以确保滚筒拥有良好的换热性能。之后随着滚筒的转动就会慢慢的被刮刀刮下来获得成品。
　　Then the roller rotates at a relatively slow speed, and the cooling water will slowly enter the middle of the bearing from one side, and then spray onto the inner surface of the roller for cooling treatment, so that you can ensure that the roller has good heat transfer performance. Then with the rotation of the drum will be slowly scraped down to obtain the finished product.
　　氢氧化钾进行加工时使用间歇处理法如何？以上便是相关步骤了，当然在其中可能会因为操作不当出现问题，这就需要操作人提前做好预防工作了，更多内容就来网站www.jinhao360.com咨询吧。
　　How about using batch treatment method when potassium hydroxide is processed? The above is the relevant steps, of course, in which there may be problems due to improper operation, which requires the operator to do a good job of prevention in advance, more content to the website www.jinhao360.com consultation.