氢氧化钾这一物质，我们在平常生活中几乎是用不大到的，所以对该物质的了解也就仅限于书本知识了，实际接触没多少。那么接下来我们就来讲讲有关问题，比如氢氧化钾阻燃作用以及切片标准如何？
　　Potassium hydroxide this material, we are almost not used in daily life, so the understanding of the material is limited to book knowledge, the actual contact is not much. So let's talk about issues like potassium hydroxide flame retardancy and slicing standards?
　　氢氧化钾阻燃作用
　　氧化钾在工业上也叫活性阻燃剂、钠胶。根据它的结构特性，可以发现氧离子近似为立方面心紧密堆积，Al3+不规则地分布在由氧离子围成的八面体和四面体空隙之中。γ型阻燃剂不溶于水，能溶于强酸或强碱溶液，将它加热至1200就全部转化为α型阻燃剂。
　　氧离子为六方紧密堆积，晶格能很大，故熔点、沸点很高。α型阻燃剂不溶于水和酸，工业上也称钠氧，是制金属钠的基本原料；可作研磨剂、阻燃剂、填充料等；高纯的α型阻燃剂还是生产人造刚玉、人造红宝石和蓝宝石的原料。
　　Flame retardancy of potassium hydroxide
　　Potassium oxide in the industry is also known as active flame retardant, sodium glue. According to its structural characteristics, it can be found that oxygen ions are closely packed in a vertical center, and Al3+ is irregularly distributed in the octahedral and tetrahedral Spaces surrounded by oxygen ions. γ type flame retardant insoluble in water, soluble in strong acid or alkali solution, it will be heated to 1200 all converted into α type flame retardant.
　　Oxygen ions are packed tightly hexagonal, lattice energy is very large, so the melting point, boiling point is very high. α type flame retardant is insoluble in water and acid, also known as sodium oxygen in the industry, is the basic raw material of metal sodium; Can be used as abrasive, flame retardant, filling material, etc. High purity α -type flame retardants are also used in the production of artificial corundum, rubies and sapphires.

　　氢氧化钾切片标准
　　Potassium hydroxide section standard
　　1、首先切片之后的产品断面位置应该确保是比较完整的，没有一些比较明显的缺口凸起等情况，而且表面因为切片处理而产生的刀痕还有裂纹等都是比较少的。
　　First of all, the section position of the product after slicing should ensure that it is relatively complete, without some obvious gaps and protrusions, etc., and there are few knife marks and cracks on the surface due to slicing.
　　2、在进行切片的时候也是要求有比较高的准确度包括说切割出来的产品之间的厚度差等都是要求在一定范围之内的，并且在切割结束之后不应该出现氢氧化钾卷翘起来的情况。
　　when slicing is also required to have a relatively high accuracy, including the thickness difference between the products cut out is required within a certain range, and after the end of cutting should not appear potassium hydroxide roll up.
　　3、很多的产品在进行切片的时候都是会有一些不合格的产品，但是我们在进行加工的时候是需要尽可能的提高其合格概率的，这样我们效率等都是会有显着提高的。
　　Many products will have some unqualified products when they are slicing, but we need to improve the probability of qualification as much as possible when we are processing, so that our efficiency will be significantly improved.
　　4、我们在进行切片的时候可以选择更高的设备进行处理，这样我们再进行加工时候的效率也是会有所提高的。而且还可以减少原材料消耗的量。
　　When we slice, we can choose higher equipment for processing, so that the efficiency of processing will also be improved. It also reduces the amount of raw materials consumed.
　　使用氢氧化钾时一定要严格对待，以上内容希望能够大幅度的帮助您，如果您想了解其他方面更多的事项，那就来https://www.tsswhg.com我们网站咨询！
　　The use of potassium hydroxide must be strictly treated, the above content hope to be able to help you greatly, if you want to know more about other matters, then come to https://www.tsswhg.com our website consultation!