氢氧化钾一般都是需要使用到输送机来对物料进行输送的，还有就是在进行包装的时候产品的输送也都是需要使用到输送机的，但是有的时候在进行运输的物料当中可能会混入进去一些较大块状的，那么再应该怎么做来避免输送机堵塞呢。
Potassium hydroxide generally needs to be transported to the conveyor to transport the materials. In addition, the conveyor is also required for the transportation of products during packaging. However, sometimes some large blocks may be mixed in the transported materials, so what should be done to avoid the blockage of the conveyor.
我们在想办法避免输送机出现堵塞情况之前首先需要了解一下可能会导致堵塞的一些情况，比如说操作的时候没有按照正确的方法来进行操作那么可能会导致堵塞，还有就是进行输送的物料输送过大导致设备负载运转那么设备再承受不住的时候就可能会导致出现堵塞的情况。
Before we try to avoid the blockage of the conveyor, we first need to understand some conditions that may lead to the blockage. For example, if the operation is not carried out according to the correct method, it may lead to the blockage, In addition, if the conveying material is too large, resulting in the equipment load operation, then the equipment can no longer bear it, it may lead to blockage.

所以一般正常情况下使用的时候只需要控制好输送的氢氧化钾一般都是不会出现堵塞情况的，不过也是需要避免出现设备空转没有物料进行输送的情况，因为在这种情况下虽然不会导致出现堵塞的情况，但是会直接的对设备轴承造成比较严重的损坏。
Therefore, in normal use, it is only necessary to control the transported potassium hydroxide. Generally, there will be no blockage. However, it is also necessary to avoid the situation that the equipment is idling and there is no material for transportation, because in this case, although there will be no blockage, it will directly cause serious damage to the equipment bearings.
而在使用的时候控制好添加物料的输送其实就是非常重要的，但是其实我们都是知道如果人工进行添加的话这个计量是很不好控制的，所以在这一种情况下我们就可以选择安装一个给料器就可以很好的调整添加的计量。
In fact, it is very important to control the transportation of added materials when in use, but we all know that this measurement is very difficult to control if added manually, so in this case, we can choose to install a feeder to adjust the added measurement.
上面介绍的就是氢氧化钾怎么避免输送机堵塞，因为如果有某一个部分出现了卡壳其实对于整个流程来书都是会有阻碍的。
The above introduction is how to avoid the blockage of potassium hydroxide conveyor, because if a jam occurs in a certain part, it will hinder the whole process.