氢氧化钾如果长时间不用,如果我们不能确保它的存储环境,所以会导致受影响的产品与潮湿,潮湿的影响,再加上空气中的氧气和水,很容易产生粘结问题,一旦产品粘结,以备后用,效果会打折,所以我们必须注意操作的保护,我们就容易理解结块的原因。
　　If potassium hydroxide is not used for a long time, if we can't ensure its storage environment, it will lead to the impact of affected products and humidity, plus the oxygen and water in the air, it is easy to produce bonding problems. Once the product is bonded for later use, the effect will be discounted, so we must pay attention to the protection of operation, and we can easily understand the reason of agglomeration.
　　1、吸湿结块。
　　1. Hygroscopic caking.
　　氢氧化钾包装采用双层包装袋，如果缝不够快或缝不够严，产品在包装袋内容易吸潮，影响其质量。为此，将原来的单缝改为双缝，并要求包装人员检查装夹、缝合等工序，以达到很大程度的隔离空气，大大减少了由于结块问题而导致的密封松动的发生。
　　Potassium hydroxide is packed in double-layer bags. If the seams are not fast enough or tight enough, the products are easy to absorb moisture in the bags and affect their quality. For this reason, the original single seam is changed to double seam, and the packaging personnel are required to check the clamping, sewing and other processes, so as to achieve a great degree of air isolation, greatly reducing the occurrence of loose sealing caused by caking problems.
　　2. 受温度的影响。
　　2. Affected by temperature.

　　氢氧化钾的温度是由汽包的冷却水流量和汽包的转速决定的。循环水的体积、循环水的温度、料筒中的喷嘴是否堵塞、料筒是否结垢直接影响产品的温度，并严重影响机械下料温度的均匀性。清洗喷嘴后，清洗桶内水垢，增加循环水体积，将产品温度从63c-66c降至58C。通过降低冲裁温度，可以减轻结块现象。
　　The temperature of KOH is determined by the cooling water flow of drum and the rotating speed of drum. The volume of circulating water, the temperature of circulating water, whether the nozzle in the barrel is blocked, and whether the barrel is scaling directly affect the product temperature, and seriously affect the uniformity of the mechanical cutting temperature. After cleaning the nozzle, clean the scale in the barrel, increase the volume of circulating water, and reduce the product temperature from 63c-66c to 58c. By reducing the cutting temperature, the caking can be reduced.
　　氢氧化钾粘结的原因有很多种,与环境的关系,温度,有非常大的,所以我们应该特别注意这两个方面,为了避免影响我们的使用,对其日常保护和存储需要考虑很多因素,每个链接不能草率,毕竟,它的质量也影响使用效率的基本因素之一。
　　There are many reasons for potassium hydroxide bonding, such as the relationship with the environment, temperature, and so on. Therefore, we should pay special attention to these two aspects. In order to avoid affecting our use, we need to consider many factors for its daily protection and storage. Each link should not be hasty. After all, its quality also affects one of the basic factors of use efficiency.