我们也听说过氢氧化钠被使用的材料可用于去除大量的重油,但事实上我们也知道何时使用碱性氢氧化钠本身是相对强劲,所以在使用手受伤严重的,如氢氧化钾的使用配置时使用除了代理也可以有一个更好的,但与效果。
　　We have also heard that the materials used for sodium hydroxide can be used to remove a large amount of heavy oil, but in fact, we also know when to use alkaline sodium hydroxide itself is relatively strong, so when using hand injuries are serious, such as the use of potassium hydroxide configuration, the use of agent can also have a better, but with the effect.
　　1. 我们在配置时，首先需要准备850g的水注入除油池中使用，然后依次加入适量的氢氧化钾、硫酸钠、海藻酸钠等物质到除油池中。将所有的物料放入罐内后，用搅拌装置搅拌至均匀。
　　1. In the configuration, we need to prepare 850g of water for use in the oil removal tank, and then add a proper amount of potassium hydroxide, sodium sulfate, sodium alginate and other substances to the oil removal tank. After all the materials are put into the tank, use the mixing device to mix them evenly.
　　2、然后分别准备一个塑料桶放入水中和添加剂中搅拌均匀，直到材料完全融化即可倒入塑料桶中，而中国人只是在除油槽中搅拌均匀，这样就制成了可用的除油剂;
　　2. Then prepare a plastic bucket and put it into the water and the additive and mix them evenly until the material melts completely and then pour them into the plastic bucket, while the Chinese just mix them evenly in the oil removal tank, so as to make the available oil removal agent;

　　3,大部分金属的时间只需要除了除油脱脂剂的浸泡10分钟左右,如果有重油轻轻擦拭,几乎可以达到更好的除油效果,因为许多的工业用机械配件长期下润滑油的作用是将会有重油垢,通常这个也需要经常清洁确保良好的性能。
　　3. Most metals only need to be soaked in degreaser for about 10 minutes. If there is heavy oil to be wiped gently, it can almost achieve better degreasing effect, because many industrial mechanical parts will have heavy oil scale for a long time, which also needs to be cleaned frequently to ensure good performance.
　　其实用氢氧化钾加脱脂剂的效果往往很好，而且因为它的碱度不如氢氧化钠强，所以在用手等损伤都比较小。
　　In fact, the effect of potassium hydroxide plus degreaser is often very good, and because its alkalinity is not as strong as sodium hydroxide, so the damage of hands is relatively small.