氢氧化钾切割作为产品加工工艺流程的关键工序，其加工效率和加工质量直接关系到整个生产的全局。因此在进行产品切割的时候我们需要严格的按照要求进行操作，下面就来了解下切割工艺的原则：
　　Potassium hydroxide cutting is the key process of product processing process. Its processing efficiency and quality are directly related to the overall production. Therefore, when cutting products, we need to operate in strict accordance with the requirements. Here are the principles of cutting process:
　　1、切割精度高、表面平行度高、翘曲度和厚度公差小。
　　1. High cutting accuracy, high surface parallelism, small warpage and thickness tolerance.
　　2、断面完整性好，消除拉丝、刀痕和微裂纹。
　　2. Good section integrity, eliminate drawing, knife mark and micro crack.
　　3、提高成品率，缩小刀（钢丝）切，降低氢氧化钾损耗。
　　3. Improve the yield, reduce the knife (steel wire) cutting, reduce the loss of potassium hydroxide.

　　4、提高切割速度，实现自动化切割缝。
　　4. Improve cutting speed and realize automatic cutting seam.
　　以上是关于氢氧化钾切割工艺技术的要求，那么只有在运行中按照正确的准则操作才能获得合格的产品，如果稍有不慎就会造成不必要的麻烦，因此小编建议大家按照严格要求进行。
　　The above is about the requirements of potassium hydroxide cutting technology, so only in operation according to the correct guidelines can we get qualified products, if there is a little carelessness will cause unnecessary trouble, so we suggest that we carry out according to strict requirements.
　　本文由https://www.tsswhg.com发布
　　This article is published by https://www.tsswhg.com